|
FEATURES
- Sends On/Off commands X-10
- Can control up to a maximum of 4 addresses
- Can be used with current switches
- Can be connected to a potential-free outlet of an external electrical appliance
- Two-way X-10 communication
- Status can be requested after commandshave been sent
- Enhanced reliability X-10 communication
- LED indication
PRODUCT DESCRIPTION
To operate the switching actuators that have been fitted, interfaces are required. When desired, each switching actuator can be controlled by more than one interface. This can be easily accomplished without having to alter the wiring. All that has to be done is that the correct addresses have to be set in, even when the actuator and interface are located in different groups or phases.
The TMA4 is a switch interface that is mounted in a junction box located behind switches or pulse switches. By applying the TMA4, it is possible to switch lighting or other electrical appliances provided with switching actuators by remote control. Used in combination with an AWM2, the TMA4 can carry out various alternating and crisscross switching operations.
The wires of the TMA4 module can be connected to potential-free switches or pulse switches, thus enabling it to be operated locally. With one module, a maximum of four addresses can be controlled by means of, for example, connecting it to two series of switches or four pulse switches/changeover switches. The addresses can also, in combination with the computer interface CM11, be used to start (conditional) scenarios.
| 
