|
FEATURES
- Plug-In module with receiver for X10 Marmitek remote controls
- Transmits signals of X10 Marmitek remote controls to X-10 signals for the mains
- Built-in appliance module: Remote control On and Off for lights and appliances
- Receives all 16 House Codes
PRODUCT DESCRIPTION
The TM12 Transceiver module is the central receiver that is necessary to make use of wireless remote controls, wireless switches and wireless sensors. The TM12 transmits these wireless signals into X10 signals over the house wiring to control X10 modules remotely.
The built-in appliance module can be switched with a command from an RF controller, such as a remote control or with the X10 protocol over the house wiring. As the transceiver module is simply inserted into wall outlets like an ordinary plug, there is no installation to be carried out. Just set the wheel on the front to the desired house code. Note: the unit code of the built-in appliance switched outlet is always unitcode 1. When used with the Computer Interface CM11, the TM12 acts as the RF Gateway to get signals from any X10 wireless transmitter and to transmit them onto the AC wiring to be received by the CM11 interface to initiate macros.
TECHNICAL DATA
| • |
Power Supply: |
|
230 V ±10% / 50 Hz |
| • |
Supply current: |
|
< 20 mA capacitive |
| • |
Making capacity: |
|
13 A (resistive loads) |
| • |
RF receiver frequency: |
|
433,92 MHz |
| • |
X-10 powerline: |
|
120 kHz ± 2 kHz / 2,5 Vpk-pk |
| • |
Signal sensitivity: |
|
15 mVpp min. 50 mVpp max. at 120 kHz |
| • |
Input impedance: |
|
> 180 Ω (L-N) at 120 kHz |
| • |
Dimensions (W x H x D): |
|
65 x 160 x 33 mm |
| • |
Operation temperature: |
|
- 10°C to 50°C |
| • |
Approvals: |
|
CE |
 |
