No RSS feed added
X10 Special Modules
X10 Lamp Module Wired LM12W for switching and dimming normal light bulbs up to 300W. The module can be installed directly into lighting fixtures. The module responds to the X10 Commands ‘On’, ‘Dim, ‘Bright’, ‘All Lights On’, ‘Off’ and ‘All Off’. Controllable from a distance with X10 signal through the existing house wiring (On/Off/dim). The X10 LM12 is...
X10 Appliance Wired module AM12W for switching 230V appliances, halogen and fluorescent lighting On or Off. Switches loads up to 3600W. Controllable from a distance with X-10 through the existing house wiring.
Universal switch module Switches 24V DC with power up to 5A Transforms an X10 signal into a switch contact Control your own low-voltage applications Remote switching of your equipment With built-in buzzer (can be switched Off) Can be installed for pulse or continuous contact Controllable from X10 commands On/Off Controllable by hand with pushbuttons on...
Transforms a make/break contact into an X10 signal It can be triggered by either a low voltage input or a dry contact closure. Switches the lights ON when the alarm goes off Can be connected to an existing burglar alarm system to flash lights connected to lamp modules and wall switch modules when the alarm trips.
Designed to connect third–party hardware such as alarm controllers to X10 Compatible with eg. GE Interlogix, Aritech, Visonic, Caddx, Honeywell, ... Develop your own X10 Compatible products or X10 Home Automation It plugs into an AC outlet and connects to the OEM product via a telephone jack (not included)
Controls up to sixteen different X10 modules Built-in appliance module switched outlet Compatible with all X10 wireless remotes
Receives all 256 House/Unit code addresses X10 Receives all regular X10 RF commands (On, Off, Dim, Brighten, etc.) Receives Extended 32 bit RF commands, such as those transmitted by X10 remotes and X10 security modules such as the DS10